Your cart is empty.

Further details for the product selected:

You Pay: £67.18 ex. VAT
You Pay: £80.61 inc. VAT


Pack Size: 1 x EA

0 in stock.

More Stock Due: 1-2 Days


Outdoor or Indoor use. For use with non-armoured elastomer and plastic insulated cables. For particular use with:- a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers. b) Cables that exhibit ‘cold flow’ characteristics. c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.


Features Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable.
 Assembly of the Cable Gland compresses and distributes the compound evenly to effect a barrier seal at the point of entry into the enclosure.
 The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired
 Provides a cable retention seal onto the cables outer sheath
 Two part sealing compound and assembly instructions are supplied with the Cable Gland
Technical Data Flameproof Exd and Increased Safety Exe
 Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22
 Suitable for use in Gas Groups IIA, IIB and IIC.
 Construction and test standards EN 50014, EN 50018, EN 50019 and EN 50281-1-1. IEC 60079-0, IEC 60079-1 and IEC 60079-7.
 IP66, IP67 and IP68 (30 metres for 7 days) ingress protection to IEC 60529 and EN 60529 and NEMA 4X.
 Operating temperature range -60°C to +80°C as standard

Copyright 2011 AEL Ltd, E & OE - Electrical Distributors in Aberdeen supplying Specialist Hazardous Area Electrical Equipment across the UK and Worldwide